Solution prep · Free Verbex lab tool
Molarity and C1V1 Dilution Calculator
Weighing a solid or diluting a stock? Enter what you have and what you need. Verbex works out the mass or volume, shows the formula and checks the answer.
Solution prep: 0.1 M NaCl
Weigh 2.922 g, dissolve in water and bring to 500 mL.
| Quantity | Value |
|---|---|
| Target concentration | 100 mM |
| Final volume | 500 mL |
| Molecular weight | 58.44 g/mol |
| Mass to weigh | 2.922 g |
Formula: mass = concentration × volume × molecular weight
Check: 2.922 g ÷ 58.44 g/mol = 50 mmol in 500 mL = 100 mM ✓
Use the molecular weight of the exact form you weigh (hydrate, salt form) and correct for purity below 100%.
Verbex Lab Tools · Solution prep v1.2 · verify before use
- Calculation aid only; verify formula, units, and lab-specific requirements before use.
- Record solvent, pH adjustment, lot numbers, storage conditions, and any deviations in the ELN.
- For accurate solution prep, bring the solution to final volume in a calibrated vessel rather than assuming perfect volume additivity.
How it is calculated
Every number shows its work.
Weighing a solid: moles needed = concentration × final volume, and mass = moles × molecular weight. For 500 mL of 0.1 M NaCl (58.44 g/mol): 0.1 mol/L × 0.5 L × 58.44 g/mol = 2.922 g.
Diluting a stock: the amount of solute is the same before and after, so C1 × V1 = C2 × V2. Leave out the value you want and Verbex solves for it, converting M, mM, µM and nM and L, mL and µL for you.
The diluent shown is V2 − V1, which assumes volumes add. For accurate work, add the stock and then bring the solution to the final volume in a volumetric flask or graduated vessel. The check line recalculates the concentration from the answer.
Use it from your AI assistant
Add Verbex Lab Tools to Claude, ChatGPT or any MCP client and ask in plain words. Your agent calls the same calculation and gets this checked notebook entry back.
https://www.verbalexperiment.com/mcpTool name: solution_prep. Free, no account, nothing stored.
