Skip to contentVerbex

Cell culture · Free Verbex lab tool

Hemocytometer and Cell Seeding Calculator

Enter the cells you counted. Verbex works out viable cells/mL and viability, then the cell suspension and medium for every well, dish or flask, and checks you have enough cells.

Your numbersExample loaded

1. Your count

2. Your seeding plan

More optionsOptional
Notebook entryMath checked ✓
Viable cells/mL1.35 × 10⁶
Cell suspension per well222.2 µL
Medium per well1.778 mL

Cell count and seeding: HEK293, passage 12

1.35 × 10⁶ (1,350,000) viable cells/mL, viability 94.41%. Improved Neubauer, 1 mm squares: 270 live and 16 dead cells in 4 squares.

StepResultWorking
Live cells per square67.5270 cells ÷ 4 squares
Live cells/mL on the slide6.75 × 10⁵67.5 ÷ 0.1 µL per square × 1,000
Dilution factor2(10 µL + 10 µL) ÷ 10 µL
Viable cells/mL1.35 × 10⁶6.75 × 10⁵ × 2
Total cells/mL (live + dead)1.43 × 10⁶7.15 × 10⁵ × 2
Viability94.41%270 ÷ (270 + 16) × 100
Counting errorabout ±6.1%1 ÷ √270

Seeding: 6 wells of a 6-well plate at 3 × 10⁵ cells per well

That is 31,250 cells/cm², or 1.5 × 10⁵ cells/mL in 2 mL (9.6 cm² per well, Thermo Fisher).

ForSuspensionMedium
One well222.2 µL1.778 mL
6 wells + 10% extra1.467 mL11.73 mL

Mix the cell suspension into the medium (13.2 mL in all), then dispense 2 mL per well. Needs 1.98 × 10⁶ viable cells; 10 mL of suspension holds 1.35 × 10⁷.

Reference values: Improved Neubauer, 1 mm squares: 1 mm × 1 mm × 0.1 mm deep = 0.1 µL per square (Marienfeld, counting grids); 6-well plate: growth area 9.6 cm², medium 1 mL to 3 mL (Thermo Fisher Scientific, Useful numbers for cell culture, retrieved 2026-11-13).

Check: 1.35 × 10⁶ viable cells/mL ÷ 2 × 0.4 µL counted = 270 live cells ✓; 222.2 µL × 1.35 × 10⁶ viable cells/mL = 3 × 10⁵ cells per well ✓; suspension + medium = 2 mL ✓

Verbex Lab Tools · Cell count and seeding v1.0 · verify before use

How it is calculated

Every number shows its work.

A counting chamber holds a known volume over each square: 1 mm × 1 mm × 0.1 mm deep is 0.1 µL on an improved Neubauer or Bürker chamber, and 0.2 µL on a Fuchs-Rosenthal (Marienfeld). Cells counted ÷ volume counted gives cells per µL, and × 1,000 gives cells/mL. On a 0.1 µL square that is the familiar mean count × 10⁴.

The dilution factor is built from the volumes you mixed: (sample + dye) ÷ sample, so 10 µL of cells in 10 µL of trypan blue is a factor of 2. Viable cells/mL uses the live count only; viability is live ÷ (live + dead).

For seeding, the cells each well, dish or flask needs are divided by viable cells/mL to give the volume of cell suspension, and medium makes up the rest. A target in cells/cm² is multiplied by the growth area. Areas are Thermo Fisher's published values (retrieved November 13, 2026); other makers differ slightly, so you can enter your own. Totals include the extra you choose for pipetting loss; 10% is a convention.

The flags catch a count worth repeating: fewer than 100 cells counted (counting error is about 1 ÷ √cells, after Student, 1907), a mix outside the 2.5 × 10⁵ to 2.5 × 10⁶ cells/mL that Bio-Rad gives for a hemocytometer, or squares that differ by more than chance explains. That last one is a Verbex rule of thumb, not a standard. The calculator does not choose a seeding density for your cell line.

Use the analysis API

Run the same calculation from your own workflow using the HTTP API. Inputs, working and validation are returned together.

View the API contract →